Makita DTD172RTJ, Instruction Manual

Page: 5 / 124

5 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DTD172
Fastening capacities Machine screw M4 - M8
Standard bolt M5 - M16
High tensile bolt M5 - M14
No load speed Max impact mode 0 - 3,600 min -1
Hard impact mode 0 - 3,200 min
-1
Medium impact mode 0 - 2,100 min
-1
Soft impact mode 0 - 1,100 min
-1
Wood mode 0 - 1,800 min -1
Bolt mode 0 - 3,600 min
-1
T mode (1) 0 - 2,900 min
-1
T mode (2) 0 - 3,600 min
-1
Impacts per minute Max impact mode 0 - 3,800 min -1
Hard impact mode 0 - 3,600 min -1
Medium impact mode 0 - 2,600 min
-1
Soft impact mode 0 - 1,100 min
-1
Wood mode 0 - 3,800 min
-1
Bolt mode 0 - 3,800 min -1
T mode (1) -
T mode (2) 0 - 2,600 min
-1
Rated voltage D.C. 18 V
Overall length 114 mm
Net weight 1.2 - 1.5 kg
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi -
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for screw driving in wood, metal and plastic.
Noise
The typical A-weighted noise level determined accord -
ing to EN62841-2-2:
Sound pressure level (L
pA
) : 97 dB (A)
Sound power level (L
WA
) : 108 dB (A)
Uncertainty (K) : 3 dB (A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.