10 ENGLISH
4.
Release your finger from the switch trigger before
moving the contact element from the material.
Contact actuation:
In this mode, you can drive staples sequentially.
1.
Pull the switch trigger.
2.
With the switch trigger pulled, place flat the con
-
tact element on the material to drive the staples.
3.
Move the tool to the next area and place flat the
contact element on the material again.
►
Fig.13:
1.
Switch trigger
2.
Contact element
3.
Depth guide
If the head of the staple remains above the workpiece
surface, drive the staple while holding the stapler head
firmly against the workpiece.
►
Fig.14
NOTE:
If the head of the staple still remains above
the workpiece even you hold the stapler head,
the material may not be suitable for the stapler.
Continuing to use the stapler on such material may
result in a damage to the driver of the stapler and/or
stapler jamming.
Anti dry fire mechanism
When the magazine is empty, the switch trigger can no
longer be pulled. At this time, insert a new staples in the
magazine. The switch trigger can be pulled again.
Checking remaining staples
Remaining staples can be checked through the sight
window.
Reload staples when no remaining staples can be seen
in the sight window.
►
Fig.15:
1.
Sight window
2.
Staples
3.
Pusher
Removing jammed staples
WARNING:
Make sure that the battery car
-
tridge and staples are removed before removing
jammed staples.
Open the sub magazine backward and take out jammed
staples from the opening for firing.
►
Fig.16:
1.
Opening
2.
Sub magazine
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual.
The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Staples
•
Makita genuine battery and charger
•
Safety goggles
NOTE:
Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
