10
–
When the machine hits a
foreign object. Wait until
the machine cools down.
Inspect the machine and
replace the parts if needed
before continuing operation
–
Whenever the machine
starts vibrating or making
noise unusually
–
When attaching or removing
grass catcher
–
When someone enters your
working area
–
When crossing surface other
than grass
– When transporting.
•
Stop the cutting tool:
–
If you have to tilt the machine
–
When crossing surfaces
other than grass
–
Transporting the machine
to and from surfaces to be
worked.
•
Pay attention to the cutting tools.
They do not stop immediately
after switch off.
Maintenance instructions
•
Have your machine serviced by
our authorized service center,
always using only genuine
replacement parts. Incorrect
repair and poor maintenance
can shorten the life of the
machine and increase the risk
of accidents.
•
Inspect the machine on regular
base.
•
Before servicing, inspection,
adjustment, storage, or to
change an accessory, take
following steps:
–
Shut off the power source
–
Disconnect the machine
from power supply
–
Make sure that all moving
parts have come to a
complete stop
–
Allow the machine to cool.
•
Inspect on the machine for
possible damage:
–
Whether safety devices
works properly for its
intended function
– Whether all the moving
parts work smoothly and
adequately
– Whether all parts are not
damaged and properly
installed
–
Check the cutting tool for any
damage, worn or unbalance
–
Check the grass catcher
regularly for any damage or
worn
–
Check all the nuts, bolts and
screws are tight
–
Replace or repair by our
authorized service center if
there are any damaged or
worn parts.
