October 2015
4.4.13.
STOPPER PLATE IN ARM HOLDER COMPLETE
4.4.13.1.
ASSEMBLING
Figure 74
Apply Makita grease FA. No.2 on the back side of Stopper plate (139). (See
4.4.14.
M4X8 SET SCREW AND RING 26 ON ARM COMPLETE
4.4.14.1.
ASSEMBLING
Figure 75
1. Set Ring 26 (163) to Arm holder complete (156).
2. Tighten M4x8 Set screw (131) to the cylindrical surface of Arm complete (136) with Hex wrench 2.
Note:
When re-using the removed M4x8 Set screw (131), apply adhesive (ThreeBond 1342 (H) or Locktite 243) to the
threaded portion.
(139)
(141)
(142)
(140)
(139)
(163)
Hex wrench 2
(136)
(131)
(131)
Cylindrical surface of Arm
complete (136)
38 / 47