October 2015
3. Tap Blade case complete (46) with a plastic hammer,
then remove Bearing box section.
Note:
Be careful not to drop Bearing box section.
Figure 41
4. Remove Ball bearing 607DDW (48) with 1R269.
Figure 42
5. Remove Retaining ring S-12 (49) with 1R291.
Figure 43
6. Insert a set of 1R356 between Helical gear 53 (51) and
Bearing box (54), and put them on two 1R258.
7. Put 1R032 onto Helical gear 53 (51) and give shock with
Arbor press.
Figure 44
(46)
Bearing box section
1R269
(48)
1R291
(49)
1R032
1R356
1R258
(51)
(56)
(54)
1R258
25 / 47