October 2015
5. Apply Makita grease FA No.2 a little on Center plate (62)
against Center cover (63).
6. Apply Makita grease FA No.2 a little on the sliding
surface between Center cover (63) and Center washer
(66).
7. Mount Center plate (62) to the four bosses on Safety
cover (68).
Figure 62
8. Temporarily tighten M5x16 H. S. button head bolt (70).
Figure 63
Figure 64
9. Move Center cover (63) until its projection touches the flange of M6x16 Hex socket head bolt (65).
10. Fix Center cover (63) to Blade case complete (46) with M6x16 Hex socket head bolt (65).
11. While strongly pushing Safety cover (68) in the direction indicated by the arrow, tighten M5x16 H.S. button head
bolt (70).
Four bosses
(62)
(66)
(63)
(68)
(69)
(70)
(70)
(65)
(68)
(46)
Projection on Center cover (63)
Flange of
M6x16 Hex socket head bolt (65)
32 / 47