5-3-1-2
For DJR186
[1] Remove Insulation cover. (Refer to 5-1 Insulation cover.)
[2] Remove two Brush holders.
Fig. 5-3-1-1-9
[10] Remove Ball bearing 607ZZ with 1R269.
Ball bearing
607ZZ
1R269
Fig. 5-3-1-2-1
[3] Loosen four M5x25 Pan head screws, and remove Motor housing section.
M5x25 Pan head
screw (4 pcs.)
Motor housing section
Fig. 5-3-1-2-2
[4] Loosen two M4x16 Pan head screws, and remove Armature ass'y.
Note:
If it is hard to remove Armature ass'y, warm Gear housing L assembly with a heat gun.
Armature ass'y is assembled at the factory under severe quality control, so do not disassemble it.
M4x16 Pan head
screw (2 pcs.)
Armature ass'y
14 / 22
