7
Wiring diagram
Fig. 7-1
Wiring to Motor housing
Wiring to Terminal
Put Brush holder’s Lead wire
(black) into this lead wire holder.
Brush holder
Brush holder
Put Brush holder’s Lead wire
(red) into this lead wire holder.
Brush holder
Put Brush holder’s Lead wire
(red) into this lead wire holder.
Brush holder
Pass Lead wire through Line filter, and wind it around
Line filter one time as shown in the figure on the
right.
Line filter (if used)
Connect Flag receptacle as shown below.
Flag receptacle
Lead wire
21 / 22
