5-4
Gear complete
5-4-1
Disassembling
5-4-1-1
For DJR187, DJR360
[1] Remove Insulation cover. (Refer to 5-1 Insulation cover.)
[2] Remove Rotor ass'y (Armature ass'y). (Refer to 5-3 Rotor ass'y (Armature ass'y).)
Fig. 5-4-1-1-1
[3] Loosen twoM4x35 Hex socket head bolts, and remove Shoe guide plate.
M4x35 Hex socket
head bolt (2 pcs.)
Shoe guide plate
Fig. 5-4-1-1-2
[4] Loosen fiveM4x16 Pan head screws, and remove Gear housing R complete.
Note:
·
Roller may be attached on Gear housing R complete.
·
If LED circuit is removed, be sure to assemble it again.
Gear housing R
complete
M4x16 Pan head
screw (5 pcs.)
Roller
Fig. 5-4-1-1-4
[6] Remove the assembled part of Gear complete and
Slider.
Fig. 5-4-1-1-3
[5] LoosenM4x8 Hex socket head bolt, and remove Flat
washer 4.
M4x8 Hex
socket head bolt
Flat washer 4
Gear complete
Slider
17 / 22
