![background image](http://html1.mh-extra.com/html/makita/dhr202z/dhr202z_instruction-manual_4103619004.webp)
4
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Switch trigger
4-1. Lamp
5-1. Reversing switch lever
6-1. Rotation with hammering
6-2. Lock button
6-3. Action mode changing knob
7-1. Rotation only
8-1. Hammering only
9-1. Grip base
9-2. Teeth
9-3. Side grip
9-4. Protrusion
9-5. Loosen
9-6. Tighten
10-1. Bit shank
10-2. Bit grease
11-1. Bit
11-2. Chuck cover
12-1. Bit
12-2. Chuck cover
13-1. Action mode changing knob
13-2. O symbol
15-1. Depth gauge
16-1. Dust cup
18-1. Blow-out bulb
20-1. Chuck adapter
20-2. Keyless drill chuck
21-1. Sleeve
21-2. Ring
22-1. Limit mark
23-1. Recesed part
23-2. Holder cap cover
24-1. Brush holder cap
24-2. Screwdriver
SPECIFICATIONS
Model DHR202
Concrete 20
mm
Steel 13
mm
Capacities
Wood 26
mm
No load speed (min
-1
)
0 - 1,200
Blows per minute
0 - 4,000
Overall length
358 mm
Net weight
3.5 kg
Rated voltage
D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE043-1
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood, metal,
ceramic and plastic.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 87 dB (A)
Sound power level (L
WA
) : 98 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
) : 14.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : chiselling
Vibration emission (a
h,CHeq
) : 11.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D
) : 3.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Summary of Contents for DHR202Z
Page 55: ...55 ...