P 9/ 11
D
HP
482
Circuit diagram
＊
Repair of LED circuit
Repair LED circuit with Non-insulated terminal and Polyolefin tube (inner diameter 4mm) as drawn.
Put lead wires as drawn in
Fig. 4
of Wiring diagram after repairing. (Lead wires need to be cut to the length that can be stored as
drawn.)
Switch
M1 M2
＋
Terminal
AS
－
LED circuit
Red (14AWG)
Black (14AWG)
Yellow (22AWG)
Black
(14AWG)
Red (14AWG)
Black (26AWG)
Brush holder complete
Line filter
（
if used
）
Flag receptacle with lock (#250, t=0.8)
Straight receptacle with lock
(#187, t=0.8)
Flag receptacle with lock
(#250, t=0.8)
Flag receptacle w/o lock
(#187, t=0.8)
Line filter
（
if used
）
Blue
(22AWG)
Earth terminal
（
if used
）
Black, Black, Black
Non-insulated terminal
LED circuit
White, Black (26AWG)
Switch
White
(26AWG)
Crimp with
Non-insulated
terminal.
Crimp with
Non-insulated
terminal.
Shrink Polyolefin tube.
2mm or more
2mm or more
End of
Non-insulated
terminal
End of Polyolefin tube
End of Polyolefin tube
Shrink Polyolefin tube.
FET
Heat sink
White (26AWG)
*
AWG: American Wire Gauge
Black
(26AWG)
Makita Corporation
