P
3
/
5
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Terminal Unit
Assemble Terminal unit to Charger case cover as described in
Fig. 3
.
Fig. 3
1. Slide Compression spring 4 (233194-8) over the pin of
Charger case cover until it stops against the rib.
2. Insert three legs of Terminal unit into the
corresponding bosses of Charger case cover.
Then connect Connectors 1 and 2 of Terminal
unit securely to Charging circuit as illustrated
on left in
Fig. 2
.
Terminal unit
By unscrewing PT3x10 Tapping screw,
Terminal cover can be removed from Charger case
Note:
Be careful not to lose Compression spring 4.
Fig. 4
Disassemble Terminal cover as described in
Fig. 4
.
[3]-3. Terminal Cover
DISASSEMBLING
ASSEMBLING
Charger case cover
pin
Compression
spring 4
(233194-8)
rib
Connector 1
Connector 2
PT3x10 Tapping screw
Charger case
Terminal cover
Compression spring 4
(231474-6/
2 pcs)
