P
2
/
5
R
epair
CAUTION: Disconnect the machine for safety before repair/ maintenance in accordance
with the instruction manual!
[3]-1. Charger Case Set
[3] DISASSEMBLY/ASSEMBLY
Remove Charger case from Charger case cover as described in
Fig. 1
.
Remove Terminal unit from Charger case cover as described in
Fig. 2
.
Cap 13 (4 pcs)
1. Remove Cap 13 (4 pcs.) from Charger case cover.
Note:
Be careful not to lose removed Cap 13.
2. Remove Charger case from Charger case cover
by unscrewing four BT4x20 Tapping screws.
BT4x20 Tapping screw (4 pcs.)
Charger case cover
Charger case
Fig. 1
Fig. 2
[3]-2. Terminal Unit
Connector 1
1. Disconnect Connector 1 and Connector 2
from Charging circuit.
2. Remove Terminal unit and Compression spring 4
(233194-8).
Connector 2
Compression
spring 4
(233194-8)
DISASSEMBLING
DISASSEMBLING
Terminal unit
Charging circuit
Note:
Be careful not to confuse the following two Compression springs because they are not interchangeable:
Compression spring 4 (233194-8) assembled to Charger case cover
Compression spring 4 (231474-6) assembled to Terminal cover