4
ENGLISH
(Original instructions)
Explanation of general view
1
Switch trigger
2
Reversing switch lever
3
Speed change knob
4
Pointer
5
Lock button
6
Mark
7
Motor housing
8
Lock button
9
Handle
10
Side grip
11
Spade grip
12
Wrench holder
13
Hex wrench
14
Chuck key
15 Reaction
16 Forward
17 Reverse
18 Limit mark
19 Screwdriver
20 Brush holder cap
SPECIFICATIONS
Model
DA4030
DA4031
Capacities
Wood
Augerbit .................................................................................. 38 mm
38 mm
Self-feed bit ............................................................................ 65 mm
High: 65 mm
Low: 118 mm
Hole saw................................................................................. —
152 mm
Steel .......................................................................................... 13 mm
13 mm
No load speed (min
-1
) .................................................................. 1,200
High: 1,200
Low: 300
Overall length ............................................................................... 417 mm
462 mm
Overall length (with an extended spade grip) ............................... 491 mm
536 mm
Net weight .................................................................................... 5.5 kg
6.3 kg
Safety class ..................................................................................
a
/II
a
/II
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling in wood, metal and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
GEB001-5
DRILL SAFETY WARNINGS
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to drill safety rules. If you use this power tool
unsafely or incorrectly, you can suffer serious per-
sonal injury.
1.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord.
Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
3.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4.
Hold the tool firmly.
5.
Keep hands away from rotating parts.
6.
Do not leave the tool running. Operate the tool
only when hand-held.
7.
Do not touch the drill bit or the workpiece imme-
diately after operation; they may be extremely
hot and could burn your skin.
8.
Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
FUNCTIONAL DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
