46
5.
Não provoque um curto-circuito na bateria:
(1)
Não deixe que quaisquer materiais
condutores entrem em contacto com os
terminais da bateria.
(2)
Evite guardar a bateria juntamente com
outros objectos de metal como pregos,
moedas, etc.
(3)
Não exponha a bateria a água ou chuva.
Um curto-circuito na bateria pode criar uma
grande carga eléctrica, sobreaquecimento, fogo e
uma quebra da corrente.
6.
Não guarde a ferramenta e a bateria em locais
onde a temperatura possa atingir ou exceder 50°C
(122°F).
7.
Não incinere a bateria, nem mesmo se esta estiver
irremediavelmente danificada ou completamente
gasta. Pode explodir e causar um incêndio.
8.
Não a deixe cair e evite o choque com outros
objectos.
9.
Não utilize uma bateria danificada.
GUARDE ESTAS INSTRUÇÕES.
Sugestões para o máximo de tempo de
vida da bateria
1.
Não espere que a bateria se gaste completamente
para voltar a carregá-la.
Pare a ferramenta e carregue a bateria sempre que
detectar um baixo nível de energia.
2.
Nunca volte a carregar uma bateria já
completamente carregada.
O carregamento excessivo diminui o tempo de
vida das baterias.
3.
Carregue a bateria em locais onde a temperatura
se situe entre 10°C e 40°C (50°F - 104°F). Se a
bateria estiver quente, deixe-a arrefecer antes de
iniciar o carregamento.
4.
Carregue a bateria uma vez a cada seis meses se
não a utilizar durante um longo período.
USO PRETENDIDO
Esta ferramenta multifuncional a bateria destina-se a ser
utilizada com um implemento aprovado listado na secção
“ESPECIFICAÇÕES” deste manual de instruções. Nunca
utilize a unidade para outra finalidade.
AVISO:
•
Leia o manual de instruções do implemento assim
como este manual de instruções antes de utilizar.
O incumprimento dos avisos e instruções pode resultar
em ferimentos graves.
DESCRIÇÃO DAS PEÇAS (Fig. 1)
NOTA:
* Em alguns países, a barreira não é fornecida com a
ferramenta.
DESCRIÇÃO DO
FUNCIONAMENTO
AVISO:
•
Certifique-se sempre de que a ferramenta está
desligada e de que a bateria é removida antes de
ajustar ou verificar as funções da ferramenta.
Caso
não desligue e retire a bateria, pode sofrer ferimentos
pessoais graves devido a arranque acidental.
Instalar ou retirar a bateria
PRECAUÇÃO:
•
Segure bem a ferramenta e a bateria quando
instalar ou retirar a bateria.
Se não segurar bem a
ferramenta e a bateria, pode fazer com que caiam das
mãos e provoquem danos na ferramenta e na bateria e
ferimentos pessoais.
• Desligue sempre a ferramenta antes de instalar ou
retirar a bateria.
(Fig. 2)
Para retirar a bateria, mantenha premido o botão na
frente da bateria e puxe.
Para colocar a bateria, alinhe a respectiva saliência com
a calha do compartimento e encaixe-a suavemente.
Insira-a completamente até fixar em posição com um
clique. Se ainda estiver visível o indicador vermelho na
parte superior do botão, não estará bem encaixado.
Coloque-a completamente, até deixar de ver o indicador
vermelho. Caso contrário, pode cair da ferramenta e
causar ferimentos em si, ou em alguém que esteja perto
de si.
NOTA:
• Não exerça força ao colocar a bateria. Se não encaixar
facilmente é porque não está correctamente
posicionada.
Acção do interruptor de alimentação
AVISO:
•
Antes de inserir a pilha na ferramenta, verifique se
o gatilho está a funcionar correctamente e se
regressa à posição “OFF” quando o solta. Não
puxe com força o gatilho sem premir o botão de
bloqueio. Isto poderá quebrar o interruptor.
Utilizar
uma ferramenta com um interruptor que não funciona
correctamente pode provocar uma perda de controlo e
ferimentos pessoais graves.
(Fig. 3)
Para evitar que o gatilho seja acidentalmente puxado, é
fornecido botão de bloqueio.
Para iniciar a ferramenta, pressione o botão de bloqueio e
puxe o gatilho. A velocidade da ferramenta aumenta com
a pressão exercida no gatilho. Para parar a ferramenta,
solte o gatilho.
Interruptor de inversão para remoção de
detritos (Fig. 4)
Esta ferramenta possui um interruptor de inversão. Para
remover detritos encravados ou presos na ferramenta,
pressione o lado “B” do interruptor para inverter a rotação.
Para funcionamento normal, pressione o lado “A” do
interruptor.