![background image](http://html1.mh-extra.com/html/makita/btw104z/btw104z_instruction-manual_4204949008.webp)
8
3.
The lamp on the left side of the display blinks so
that the number of first digit can be changed by
pushing the button.
4.
Press the button and choose the desired number.
The displayed number changes fast by keeping
pressing the button. To set the first digit, pull the
switch trigger and then release it.
5.
The lamp on the right side of the display starts to
blink so that the number of second digit can be
changed.
6.
Press the button and choose the desired number.
The displayed number changes fast by keeping
pressing the button. To set the second digit, pull
the switch trigger and then release it.
7.
For the final setting, pull the switch trigger while
pressing the indication button. The number of
impacts is set at once.
To reconfigure the number of impacts, pull the
trigger without pressing the indication button so
that return to 3 above.
Confirming the current setting number
To check the current setting number, pull the trigger
once, release it and then press the indication button.
Relation between presetting number and
action
Clockwise rotation
Auto-stop setting does not work.
Indication lamp goes out.
Then, the lamp goes out.
Red color lamp lights on.
Switch off before impacting
[number of impacts
(presetting number x 2)
x 0.02] seconds.
Green color lamp lights on.
After impacting [number of
impacts (presetting number
x 2) x 0.02] seconds.
Auto-stop setting does not work.
Presetting
number
01 - 99
0
Counterclockwise rotation
Auto-stop setting does not work.
003611
NOTE:
•
Use presetting number as a guideline. To keep the
fastening torque, number of impacts changes
automatically by remaining battery capacity.
Indicating lamp
1
013665
•
After impacting preset numbers, the indicating
lamp lights in green color.
•
The red color light will light on if the trigger is
released before the presetting number of impacts
is achieved. It indicates that the operation is
incomplete.
•
When auto-stop mechanism is working, the
indicating lamp lights red while the switch trigger is
being pulled.
ASSEMBLY
CAUTION:
•
Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out
any work on the tool.
Selecting correct socket
Always use the correct size socket for bolts and nuts.
An incorrect size socket will result in inaccurate and
inconsistent fastening torque and/or damage to the bolt
or nut.
Installing or removing socket
1.
For socket without O-ring and pin
1
2
013606
To install the socket, push it onto the anvil of the
tool until it locks into place.
To remove the socket, simply pull it off.
2.
For socket with O-ring and pin
1
2
3
013666
Move the O-ring out of the groove in the socket
and remove the pin from the socket. Fit the socket
onto the anvil of the tool so that the hole in the
socket is aligned with the hole in the anvil. Insert
the pin through the hole in the socket and anvil.
Then return the O-ring to the original position in
the socket groove to retain the pin. To remove the
1. Socket
2. O-ring
3. Pin
1. Socket
2. Anvil
1. Indicating lamp