P
6
/1
0
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Switch Lever
Fig. 9
Fig. 8
DISASSEMBLING
Switch lever can be seen by removing from Motor housing
the following five electrical parts:
Controller, Switch, Battery capacity warning lamp,
Dial 28, Terminal.
Switch
Switch lever
Controller
Dial 28
Terminal
Battery capacity
warning lamp
(1) Remove Crank housing complete from Motor housing.
(
Figs. 2
,
3
)
Then remove Motor section from Motor housing.
(
Fig. 4)
(2) Remove electrical parts (
Fig. 8
), then remove Switch
lever and Switch knob. (
Fig. 9
)
Switch knob
Switch lever
1. Pressing the locking claws of Switch knob inward with small nose pliers,
push Switch knob off from Motor housing.
locking claw
2. Switch lever can now be removed from Motor housing by bending Switch lever
to release its rear end from the ribs on Motor housing then pulling it toward
Battery cover side (in the direction of the black arrow).
Motor housing
Switch lever
