R
epair
P 3 / 10
< 2 > Replacing ball bearing 6201LLB installed in skirt
(1) Unscrew flat head screw M8x11
and detach head cover from gear housing. See Fig.5.
Fig. 5
(2) Unscrew pan head screw M4x12 and
detach skirt from gear housing. See Fig.5.
(3) Unscrew pan head screw M4x12 and
detach bearing retainer 80 from skirt. See Fig.6.
Flat head
screw M8x11
Head cover
Pan head
screw M4x12 x 4 pcs.
Gear housing
Skirt
Fig. 6
Skirt
Pan head
screw M4x12 x 3 pcs.
Bearing retainer 80
Hex nut M10
Fig. 7
(4) Set box wrench 17 on hex nut M10 and insert hex wrench 6 into the hole
of "spur gear 26 complete" as illustrated in Fig. 7. And loosen hex nut M10 with box wrench 17.
Hex wrench 6
Box wrench 17
View from hex nut 10 side
View from pad setting side
Box wrench 17
Hole of
"spur gear 26 complete"
"Spur gear 26 complete"
including sleeve,
2 ball bearings 6001DDW
and retaining ring S-12
