R
epair
P 7 / 9
<8> Assembling yoke unit
* Assemble yoke unit to motor housing with adjusting its cut part to the rib on the bottom
of motor housing.
* Be careful, not to pinch your finger when assembling armature to motor housing,
because armature is pull strong into motor housing by the magnet power of yoke unit.
Yoke unit
Motor housing
Armature
Adjust this cut to
the rib on the bottom of
motor housing.
<9> Adjusting the saw blade's angle
* Adjust the saw blade to right angle to turn base and guide fence with the repairing tool
No.1R208 as illustrated in Fig.13.
Fig.14
Fig.12
* Adjust the saw blade to 45
°t
o turn base with the repairing tool No.1R207 as illustrated
in Fig.14.
No.1R208 : 90 Degrees set square
25mm
75mm
20mm
70mm
Fig.13
No.1R207 : 45 Degrees set square
60mm
75mm
25mm
20mm
