R
epair
P 5 / 9
<4> Adjusting hex nut M8 and hex bolt M8 x 55
Hex nut M8x13 has to be so adjusted and fastened that the base can be operated smoothly
without trembling.
Flat washer 8
Hex nut M8x13
Turn base
Base complete
Hex bolt M8x55
<5> Assembling the parts for positive stop system in turn base. See Fig.10.
When lock pin is located in the groove of base complete, the lock pin has to protrude from
support plate by 2 - 3mm as illustrated in Fig.10A. This adjustment can be made by sliding
support plate within its elliptic hole.
Fig.9
Grip 32
Lock lever
Compression
spring 7
Lock pin
Pin 3
Support plate
Lock plate
Tapping screw
bind M4x12
Sliding area for adjustment
Support plate
2 - 3mm
Lock pin
Support plate
Lock lever
Base
Tapping screw
bind M4x12
Fig.10A
Fig.10
