![background image](http://html.mh-extra.com/html/makita/bhr200s/bhr200s_technical-information_230914011.webp)
R
epair
P 11 / 23
Lubrication
All of O rings built in BHR200S
Put grease on the following places in order to protect parts and machine from unusual abrasion and overheating.
Recommendable is our genuine grease, "MAKITA Grease R No.1".
Teeth of all gears built in BHR200S
(1) Cap 31
Inside of rip portion
(9) Pin 8
(12) Oil seal 25
(15) O ring case
(19) Impact bolt
(21) Plane bearing 26
(22) Tool holder
(23) Steel ball 7.0
(29) Striker
(30) Piston cylinder
(40) Cam shaft
Inside of oil seal
Inside of plane bearing 26
Whole Inner part of tool holder
Grooved portion for O ring
Bottom of cylindric portion
Grooved portion inside of O ring case
Grooved portion for O ring
Inside of perforated holes
(41) Swash bearing 10
Cam and shaft
Whole part
(38) Spur gear 10
(39) Clutch cam
Cam portion
Cam portion