P
11
/
1
4
DISASSEMBLING
Micro switch
ASSEMBLING
DISASSEMBLING
ASSEMBLING
Controller
LED circuit
Buzzer circuit
Switch unit
Connector
Connector
Connector
Fig. 29
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -5. Switch Section
After removing F/R change lever, loosen the screw that fastens
Micro switch to Reverse switch.
Micro switch can be removed by pulling in the direction
of the gray arrow while turning it counterclockwise. (
Fig. 27
)
F/R change lever
Reverse switch
screw
Fig. 27
Fig. 28
(1) Assemble Micro switch to Reverse switch by fastening
the screw to the recommended torque of 0.29 - 0.34N.m.
(2) Assemble F/R change lever to Reverse switch by fitting
the boss of Reverse switch into the concave portion of
F/R change lever. (
Fig. 28
)
(3) Assemble Trigger switch section to Housing (R).
concave portion
of F/R change lever
boss of Reverse switch
[3] -6. Replacing Switch Unit, LED Circuit, Buzzer Circuit
When removing LED circuit, Switch unit and Buzzer circuit,
disconnect Connectors in the direction designated with the arrow.
(
Fig. 29
)
Note:
Do not pull Lead wires in case of disconnecting Connectors.
Pull Connectors to protect Lead wires from breaking.
Connect Connectors.
Refer to
Circuit Diagram
.
