P
2
/
14
1R004 Retaining ring S pliers ST-2
1R035
1R036
Bearing setting plate 15.2
installing Ball bearing 6801LLB and Ring 12
assembling Spindle section to Clutch case
assembling Spindle section to Clutch case
Bearing setting plate 17.2
1R237
Round bar for arbor 8-100
1R269
1R288
1R291 Retaining ring S and R pliers
1R145
1R219
1R220
Ratchet head 9.5 (1R219)
1R222
765027-4
1R314
1R311
Retaining ring pliers with long bent nails
Code No.
Description
Use for
BFT125F
BFT043F
Model No.
Description
Item No.
Ring 38
Ring 38G
Ring 38I
Ring 38H
Spindle M/ N
Either Spiindle M or Spindle N is used. It differs from country to country.
Compression spring 19
Compression spring 19D Compression spring 19E Compression spring 19C
Cam C/ A
Cam C
Clutch ass’y D
Clutch ass’y F
Clutch ass’y G
Cam A
Armature
Clutch ass’y (as an option
for quick repair of Clutch
section) consists of Item Nos.
Part No.619265-9
Part No.619267-5
29
23
36
39
54
BFT083F
R
epair
[1] NECESSARY REPAIR TOOLS
removing/installing Ring spring 11
removing M5x10 Torx countersunk head screw from Spindle
L type Torx wrench set
Torx wrench shaft 7-23N.m
tightening M5x10 Torx countersunk head screw to Spindle
Socket adapter (1R219)
Bearing extractor
removing Ball bearing 6801LLB and Ring 12 from Spindle
removing Steel balls
removing/installing Ring spring 10 from/on Spindle M/ N
removing Retaining ring R-21
assembling M5x10 Torx countersunk head screw to Spindle
disassembling Clutch section
Torque adjust tool
Torx bit VT-25
Screwdriver magnetizer
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
Note:
Some parts numbers and descriptions differ from model to model. Refer to the following list and replace the
descriptions in this technical information. (for example, Cam C/ A means Cam C or Cam A.)
Plate
Plate G
Plate I
Plate H
1
43
32 33 43 34 35 36 37
38 39 40 41 42 62
