P
4
/1
4
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Locator Section
ASSEMBLING
Rubber plate
1) Assembling of Locator base complete, Locator complete, Leaf spring and related parts. (
Fig. 4)
1. Mount Locator complete to Locator base complete and fix them
to Housing set by tightening counterclockwise with adjustable wrench.
2. Remove Locator complete again,
then put Rubber plate in place.
Locator base complete
Locator base complete
Locator complete
3. Fit the tab of Leaf spring to Housing top as described below, then fix the other tab of Leaf spring to
Housing bottom with pliers.
4. Fix Ring spring 33 in the groove on Locator base complete as described below.
tab of
Leaf spring
Locator complete
Ring spring 33
Ring spring 33
Fig. 4
Locator base
complete
protrusion on
Housing top
protrusion on
Housing bottom
