3
ENGLISH (Original instructions)
Explanation of general view
1-1. Shaft lock
2-1. Lock-off lever
2-2. Switch lever
2-3. Lock button
4-1. Wheel guard
4-2. Bearing box
4-3. Screw
5-1. Wheel guard
5-2. Bearing box
5-3. Screw
6-1. Lock nut
6-2. Depressed center wheel/Multi-disc
6-3. Inner flange
7-1. Lock nut wrench
7-2. Shaft lock
8-1. Lock nut
8-2. Abrasive disc
8-3. Rubber pad
10-1. Wire cup brush/Wire bevel brush
11-1. Lock nut
11-2. Abrasive cut-off wheel/diamond
wheel
11-3. Inner flange
11-4. Wheel guard for abrasive cut-off
wheel/diamond wheel
12-1. Exhaust vent
12-2. Inhalation vent
SPECIFICATIONS
Model
9556HP 9557HP 9558HP
Depressed center wheel diameter
100 mm
115 mm
125 mm
Max. wheel thickness
6.4 mm
6.4 mm
6.4 mm
Spindle thread
M10
M14 or 5/8"
(country specific)
M14 or 5/8"
(country specific)
Rated speed (n) / No load speed (n
0
) 11,000
min
-1
11,000
min
-1
11,000
min
-1
Overall length
273 mm
273 mm
273 mm
Net weight
2.0 kg
2.1 kg
2.1 kg
Safety class
/II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE048-1
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model 9557HP
Sound pressure level (L
pA
) : 85 dB (A)
Sound power level (L
WA
) : 96 dB (A)
Uncertainty (K) : 3 dB (A)
Model 9558HP
Sound pressure level (L
pA
) : 86 dB (A)
Sound power level (L
WA
) : 97 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model 9557HP
Work mode : surface grinding
Vibration emission (a
h,AG
) : 7.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: disc sanding
Vibration emission (a
h,DS
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Model 9558HP
Work mode : surface grinding
Vibration emission (a
h,AG
) : 9.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: disc sanding
Vibration emission (a
h,DS
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG902-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
