5
CAUTION:
•
Always use velcro type of abrasive papers. Never
use pressure-sensitive abrasive papers.
Dust bag
Fig.5
To install the dust bag, align the
mark on the bag's
entry port with the
mark on the dust spout of the
tool and fit the entry port onto the dust spout. Then turn
the dust bag clockwise to secure it in place.
For the best results, empty the dust bag when it
becomes approximately half full, tapping it lightly to
remove as much dust as possible.
To remove the dust bag, follow the installation
procedures in reverse.
Installing paper dust bag (optional accessory)
Fig.6
Place the paper dust bag on the paper dust bag holder
with its front side upward. Insert the front fixing
cardboard of the paper dust bag into the groove of the
paper dust bag holder.
Then press the upper part of the front fixing cardboard
in arrow direction to hook it onto the claws.
Fig.7
Insert the notch of the paper dust bag into the guide of
the paper dust bag holder. Then install the paper dust
bag holder set on the tool.
Fig.8
Fig.9
NOTE:
•
If you connect a Makita dust collector to this tool,
more efficient and cleaner operations can be
performed.
OPERATION
Sanding operation
Fig.10
CAUTION:
•
Never run the tool without the abrasive paper. You
may seriously damage the pad.
•
Do not block motor vent with your finger or hand.
•
Never force the tool. Excessive pressure may
decrease the sanding efficiency, damage the
abrasive paper or shorten tool life.
Hold the tool firmly with one hand on the switch handle
and the other hand on the front grip when performing
the tool. Turn the tool on and wait until it attains full
speed. Then gently place the tool on the workpiece
surface. Keep the pad flush with the workpiece and
apply slight pressure on the tool.
MAINTENANCE
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
•
Never use gasoline, benzine, thinner, alcohol or
the like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
•
These accessories or attachments are
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
•
Abrasive paper (with pre-punched holes)
•
Velcro type of abrasive paper (with pre-punched
holes)
•
Joint 25 (for connecting to vacuum cleaner)
•
Paper dust bag
•
Paper dust bag holder
NOTE:
•
Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
