9 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
2704N
Arbor hole
(Country specific)
30 mm / 25.4 mm
Blade diameter
260 mm
Max. cutting capacities
bevel 0°
93 mm
bevel 45°
64 mm
No load speed
5,200 min
-1
Table size (L x W)
with sub tables (R) and (back)
1,045 mm x 1,066 mm (tables extended)
665 mm x 753 mm (tables stored)
with sub table (R)
without sub table (back)
567 mm x 1,066 mm (table extended)
567 mm x 753 mm (table stored)
Dimensions (L x W x H) with
table(s) not extended
with sub tables (R) and (back)
715 mm x 753 mm x 483mm
with sub table (R)
without sub table (back)
665 mm x 753 mm x 483 mm
Net weight
35.2 kg - 37.0 kg
Safety class
/II
•
Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to
EPTA-Procedure 01/2014, are shown in the table.
Symbols
The followings show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
DOUBLE INSULATION
Wear safety glasses.
Do not place hand or fingers close to the
blade.
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for cutting in wood.
Straight cutting, bevel cutting, and miter cutting are
available with this tool. This tool is not designed for non-
through cutting.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Sound pressure level (L
pA
) : 94 dB(A)
Sound power level (L
WA
) : 107 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE:
The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE:
The declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared val
-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima
-
tion of exposure in the actual conditions of use (tak
-
ing account of all parts of the operating cycle such
as the times when the tool is switched off and when
it is running idle in addition to the trigger time).