Page
7
of
37
To tighten or loosen PHT2-140 brakes:
1. Lie your powered hand truck down on a bench or flat surface with folding support
wheels folded to take load off the large wheels.
2. Ensure brakes are disengaged.
3. Remove side plate on right hand side of unit using Phillips head screw driver.
Inside this panel you will find a pictogram (below) demonstrating steps for adjustment
4. Loosen the retainer nut to allow adjustment of brake cable.
5. Turn the female adjustment clip anti-clockwise to loosen, clockwise to tighten the
brakes.
Summary of Contents for PHT2-140
Page 1: ...Rev 0919...
Page 32: ...Page 32 of 37 9 CHARGER SPECIFICATIONS 3A...
Page 37: ...Page 37 of 37...