Page
8
of
37
6. Test brakes and observe pad is depressing rubber on wheel. When brakes are
disengaged ensure that both brakes are equal distance between brake pad and
wheel rubber. The pad should not be touching the rubber.
7. Re-tighten retainer nut after desired adjustment is achieved.
8. Place PHT2-140 back on the ground and test brakes. If working correctly replace the
side plate that was removed (in step 3) and use resume normal use.
Female adjustment clip
Retainer nut
Summary of Contents for PHT2-140
Page 1: ...Rev 0919...
Page 32: ...Page 32 of 37 9 CHARGER SPECIFICATIONS 3A...
Page 37: ...Page 37 of 37...