MakerPi K300, User Manual, Page: 30 / 43

30

Next set the parameters needed for
printing and manually adjust the position
and angle of the model. After the
settings are completed, the software will
compile itself, and software will display
the time and consumables needed for
printing after the compilation completed.
Note: the information provided by the
software can be used to check whether the
consumables are sufficient and the platform
is well adjusted.

Click the icon to store the Gcode
file directly into the SD card.
If you want to save the Gcode file
somewhere else, or if you need to rename the
Gcode file, select “Save GCode” in the “File ”
and save it to the appropriate file.

Then insert the USB disk into the USB
port.