MakerPi K300, User Manual, Page: 19 / 43

19
4.5.3 Temperature, printing speed and nozzle fan adjustment

The machine can be set again if it finds
that the temperature set in Cura slice
software is unsuitable for the current
printing or forgot to turn off the nozzle
fan when printing ABS before printing.
In the main interface or the printed
interface, click the icon of nozzle and
hotbed temperature (as shown in the box)
to make the selection change.
Click the nozzle temperature icon, and the
screen will display the adjustment interface
of nozzle temperature and printing speed.
The printing speed 1.0 represents 100% of
the set speed, and 0.5 represents 50% of
the set speed.
Click the hotbed temperature icon, and the
screen will display the adjustment interface of
the hotbed temperature and fan speed. The
fan speed "on" means to open the fan, and
"off" means to turn off the fan.