3
MakerBot Replicator
MakerBot
Step 2 - Removing the Floor
Plate
Step 4 - Remove the Power
Supply
Manually rotate the threaded
z-axis threaded rod clockwise to
raise the Build Plate Holder half
way from the Floor Plate. Pull
the Build Plate forward to remove
from the Build Plate Holder.
Remove three (3) button head
Torx bolts from the rear left side of
the Mini.
Disconnect the twenty-pin
connector from the Brooklyn PCB.
Unclip connector from plastic
clips.
Pull Power Supply toward you to
remove it out of the slot.
Remove the three (3) button head
Torx bolts by using a T20 driver.
Lift up the Floor Plate from the
printer to remove.
•
•
•
•
•
•
