•
•
•
2
MakerBot Replicator
MakerBot
Step 1 - Remove the Door,
Windows and Filament Guide
Step 3 - Remove the Z-Stage
To remove the Door, pull from top
downward and away from the
Minis body.
Remove four (4) button head Torx
To remove side Windows, from the
inside of the printer, apply pressure
to pop out of the slot.
To remove the Filament Guide
Tube, pull upward.
Unplug the z-wire from the
Motor Wire Harness connected
to the Z-stage Motor.
Remove four (4) button head
Torx bolts by using a T20 driver
located in the back of the Inside
Base
Unclip the black clips on the
outer Back Panel by pushing
inward (using a 2.0mm hex
driver can help assist).
Lean the Z-stage Assembly
forward and pull up to remove.
•
•
•
•
•
