EN
4
INTRODUCTION
A
B
C
D
E
F
G
H
I
J
K
L
TeMPerATUre
WIFI
TIMe
ON/OFF
SeTTING BUTTON
GrIPPer
DeTACHABLe STeeL COLUMN
WATer PUMP COVer
CONTrOL PANeL
KEYS
+
AND
-
MAX WATer LeVeL
MIN WATer LeVeL
A
B
D
C
F
I
J
K
L
H
G
E
INSTRUCTIONS FOR USE
Step 1.
Hold the top of the gripper and place the steel column in
the container or pot.
Step 2.
release the gripper when the steel column is set to the
proper depth. The device will remain fixed in the container or pot.
IMPORTANT: MC-SV1 WiFi device must be installed in
containers that are at least 180 mm deep.
Step 3.
Fill the container or pot with water. The water level
should be between the MAX and MIN marks. The water level will
rise when you submerge the food in the container, so please don’t
overfill it from the beginning. You will know that you have the right
amount if when introducing the food, the water rises until it is
close to the MAX mark without exceeding it.
NOTE: As the water temperature increases, the water will begin to evaporate.
The appliance is equipped with an alarm that indicates if the water level drops too low.
If the water level drops below the MIN mark, the appliance will stop working automatically.
