6
Instructions Guide
Press the ‘Mode’ button (
Ref.7
) to switch to DAB/DAB+ Radio.
Fully extend the antenna (
Ref.16
).
To start an auto scan for available digital stations, press the ‘Scan’
button (
Ref.9
) and then release. This would be advisable if you
are having trouble listening to particular stations.
Once you have chosen to scan, the radio will display “Full Scan”
as it starts scanning up the frequency band. Once the scan is
complete, the first radio station with good signal will begin to
play.
To browse through the stations that have been found and
stored, turn the ‘Tune/Enter’ dial (
Ref.3
) to scroll through
stations. Once you have found your desired station, press down
the ‘Tune/Enter’ dial (
Ref.3
) to confirm your choice. The station
will begin to play.
The radio will display station information when you press
the ‘Info’ button (
Ref.6
). Press it multiple times for different
information. See page 9 for further details.
When you power up the radio again after switching off, it will
automatically tune to the same station (DAB or FM) that was last
selected.
DAB/DAB+ Radio
