5
Please note all (Ref.) refer to the Controls and Functions mapping
guide on Pages 1-2.
For mains power, insert the power supply connector into the
power input socket labelled DC 5V (
Ref.15
) on the back of the
system and plug the power supply into the mains. Alternatively,
you can power the radio with 4 x 1.5C batteries in the battery
compartment (
Ref.13
).
Ensure the antenna (
Ref.16
) is extended as far as possible so that
you can rotate it, enabling you to get the best signal that you
can.
Press the ‘Power/Standby’ button (
Ref.10
) to turn on the unit.
The system will show “Welcome to Digital Radio” on first use and
should automatically go to DAB/DAB+ radio. To begin scanning
for available stations, select the ‘Scan’ button (
Ref.9
).
Power/Standby button
To place the system in standby mode, press the ‘Power/Standby’
button (
Ref.10
). To switch back on for use, press the button
again.
To switch off the radio, press and
hold
down the ‘Power/Standby’
button. To switch the radio back on, press (do not hold) the
‘Power/Standby’ button.
Instructions Guide
Basic Operation
