10
Instructions Guide
Press the ‘Mode’ button (
Ref.7
) to switch to FM mode. The first
time you do this, the FM frequency “87.5 MHz” will be displayed
on the screen.
Fully extend the antenna (
Ref.16
).
To scan for available stations with good signal, press the
‘Scan’ button (
Ref.9
). The unit will then start scanning up the
frequency band and play the first station it finds with a good
signal.
To scan down the frequency band, press and
hold
the ‘Scan’
button (
Ref.9
) for a few seconds to find a station with good
signal.
How to tune a specific frequency manually
To listen to a specific frequency, turn the ‘Tune/Enter’ dial (
Ref.3
)
to move slowly up and down the frequency band until you are
tuned in to the required frequency.
Mono and Stereo
To change between Mono and Stereo, press the ‘Tune/Enter’ dial
repeatedly to switch between functions (
Ref.3
).
FM Radio
