8
www.major-equipment.com
Y
X
Y
Drawbar Height
Adjuster
Drawbar Lateral
Adjustment
Parking
Jack
Circlip
The MAJOR TDR Rollermower is designed to operate at a max 540-720 RPM. Always operate on level ground when
hitching / unhitching the implement. This will prevent dangerous movement.
1. Never allow anyone to stand between the tractor and the machine.
2. Ensure the machine is hitched correctly to the tractor as previously described.
3. Ensure bystanders are clear from the machine & cannot be hit with debris expelled from the machine.
4. Unlock hydraulic arms supporting the rear deck, taking care not to stand between mainframe and rear deck.
5. Ensure cutting decks are lowered to the ground.
6. Place wing locking clamps in position ‘X’ as shown in the photo below.
7. Wing PTO drive will engage automatically selector knob ‘Y’.
8. Start up the tractor PTO at a low RPM.
9. Build up to operating speed, select a suitable forward gear & proceed to cut grass. NOTE: The Selector knob is
fitted with a spring ‘Y’ in order to auto stop wing rotors when raised.
10. Tighten both the Top Link Tap ‘B’ & Lower Link Arm tap ‘A’ to lock the rear deck when raised for transport.
NOTE: This machine is factory set to operate with ‘open centre’ hydraulic systems. When connecting to tractors with
‘closed centre’ hydraulics, the Pilot valve spool knob ‘C’ must be closed (screwed ‘in’).
