7
www.major-equipment.com
Key to Main Parts
Strap
Rear
Lighting
Pulley
Cover
Hydraulic
top link
Gearbox
Cover
Parking
Jack
PTO stand
Roller
Drawbar
height
adjustment
Height
adjustment
Flashing
beacon
Hitch
adjustment
Hitch
Rotor
Gearbox
Rear deck
Starting Regulations
Always check that any imminently dangerous conditions have been eliminated before using the machine. Ensure all
guarding is present & the operator is fully aware of the operations of the machine
Always ensure the pins lock the PTO shaft yoke ends onto the spline shafts on both the tractor and the implement. An
unlocked shaft could slip out of position, causing notable mechanical damage and serious injury to both operator and
bystanders.
Hitching to the Tractor
ALWAYS OPERATE ON LEVEL GROUND WHEN HITCHING/UNHITCHING THE IMPLEMENT. THIS WILL PREVENT
DANGEROUS MOVEMENT. NEVER ALLOW ANYONE TO STAND BETWEEN THE TRACTOR AND THE TDR
ROLLERMOWER.
1.
Reverse the tractor, connect the hitch & secure in position with correct size drawbar pin
2.
Ensure that the circlip is on top as shown below
3.
Ensure the tractor brake is applied
4.
Adjust the level of the drawbar until the main body is level.
5.
Connect the hydraulic connections to the tractor.
6.
Mount the solenoid control box in tractor cab.
7.
Fit the PTO shaft & secure the PTO cover chains.
8.
Raise the parking jack. Solenoid Control Box Mounting.
9.
Adjust drawbar instead of cutting PTO shaft.
