background image

1

www.major-equipment.com

Introduction

Thank you

We appreciate having you as a customer and wish you many years of safe and satisfied use of your machine.

Using Your Operator’s Manual

 

This manual is an important part of your machine and should remain with the machine when you buy it. 

Reading your operator’s manual will help you and others avoid personal injury or damage to the machine. Information 

given in this manual will provide the operator with the safest and most effective use of the machine. 

Sections in your operator’s manual are placed in a specific order to help you understand all the safety messages so 

you can operate this machine safely. You can also use this manual to answer any specific operating or servicing ques

-

tions. 

Safety Issues

Your manual contains special messages to bring attention to potential safety concerns, machine damage as well as 

helpful operating and servicing information. Please read all the information carefully to avoid injury and machine dam-

age.

Product Identification

Machine Serial Numbers

If you need to contact MAJOR or your MAJOR dealer for information on servicing or spare parts, always provide the 

product model and serial numbers. 

We suggest that you record your machine details below:

Model No: 

 

____________________________________

Serial No: 

 

____________________________________ 

Date of Purchase:  

____________________________________

Dealer Name:   

____________________________________

Dealer Telephone: 

____________________________________

Product Specifications

Model

MJ2000

Overall Width

2.2m

Working Width

2m

Transport Width

2.3m

Power (HP) 

50-75

PTO rpm

540

Blade Speed

2006m/min

Cutting Height

12 - 150mm

Weight 

1400kg

Collector Capacity

3m³

Register Your Product and Warranty Online

To register your product through the Internet, simply go to the Support section on www.major-equipment.com. 

Completing the information, either online or with the product warranty card, will ensure the customer that their product 

receives all post sales service and important product information. The MAJOR MJ2000 is warranted for 12 months. 

Summary of Contents for MJ2000



























Reviews: