8
www.major-equipment.com
Adjusting the Cutting Height
To alter the cutting height, adjust the side skids to the desired cutting height by:
1. Removing the four nuts on each skid
2. Relocating the skid in the desired location
3. Replace the four nuts & tighten.
Removing the machine from the tractor
1.
Disengage the PTO. Set the implement on a flat surface.
2. Stop the tractor and engage the parking brake.
3. Rest the mower on the ground.
4. Switch off the tractor engine.
5. Remove the ignition key from the dashboard.
6. Remove the driveline.
7. Detach the hydraulic connections.
8. Block the mower’s wheels with wedges or other suitable means
9. Remove the weight from the tractor hitch by use of the Parking Jack.
10. Detach the implement from the tractor by disconnecting the hitch
Maintenance
The machine must always be disconnected form the tractor before any cleaning, lubricating and servicing operations
can be carried out.
If emergency operations are required whilst the machine is connected to the tractor, switch off the engine, engage the
parking brake and disengage the PTO.
Good, regular maintenance and correct use are if the machine is to remain safe and long lasting.
7. Do not try to force the discharge operation in case of machine malfunction. Please get in touch immediately with
your dealer, should the tank remain jammed in high position.
