Major tech MT876, Instruction Manual

Page: 25 / 28

25
9-2. General Specifications
Insulation Class 2, Double Insulation
Diode Test Test current approx.1mA , open circuit
voltage of 3V typical
Continuity Test Audible signal if the resistance is <50 Ω
Battery Test current 9V (approx.6mA); 1.5V (approx.30mA)
Low Battery Indication “ ” is displayed
Display
4000 count LCD
Over Range Indication “OL” is displayed
Polarity
Minus symbol “-” is displayed for negative polarity
Measurement Rate 3 readings per second, nominal
Auto Power Off approx. 15 minutes
Input Impedance >10M Ω AC and DC Voltage
AC Response True RMS
AC Voltage Bandwidth 50Hz to 1kHz
AC Current Bandwidth 50Hz to 400Hz
Batteries
Two AAA 1.5V batteries
Fuse 10A/600V fast acting Fuse; 500mA/600V fast acting
Fuse
Operating Environment 5 to 40 C (41 to 104 F) ° °
Storage Environment -10 to 50 C (14 to 122 F) ° °
Operating Humidity Max 80% up to 31 C (87 F) decreasing linearly ° °
to 50% at 40 C (104 F) ° °
Storage Humidity <80%
Dimensions/Weight 154 x 74 x 43mm / Approx. 221g (No batteries)
Safety Complies with UL 61010-1 v.3 for measurement
Category III 600V,
Pollution Degree 2
Probe assemblies to be used for Mains
measurements shall be RATED
as appropriate for Measurement
Category III according to IEC 61010-31
and shall have a voltage RATING of at
least the voltage of the circuit to be measured.
Measurement Category III (CAT III) is
applicable to test and measuring
circuits connected to the distribution
part of the building’s low-voltage
MAINS installation.