Major tech MT876, Instruction Manual

Page: 16 / 28

16
5.6.
Continuity Check
WARNING:
Never test continuity on a live circuit.
1.
Set the rotary function switch to the CAP Position.
2. Press the MODE Button until the “ ” symbol appears on the LCD
display.
3. Insert the black test lead banana plug into the negative COM
Input Jack; Insert the red test lead banana plug into the Positive
Input Jack.
4. Touch the test lead probes to the device or wire under test.
5. A beeper will sound if the resistance is approx. 50 ohms or less
and the resistance reading will be shown on the LCD display.