![background image](http://html1.mh-extra.com/html/major-tech/mt26/mt26_instruction-manual_3788911014.webp)
10
14
4.6. DIODE TEST
1. Set the rotary function switch to the position.
2. Press the MODE button until the symbol appears on the LCD display.
3. Insert the black test lead into the COM input jack and the red test lead
into the
Ω
input jack.
4. Touch the test lead probes to the component under test.
5. Forward voltage will indicate 0.4 to 0. 7 on the display. Reverse voltage
will indicate "OL". Shorted devices will indicate near 0 and an open
device will indicate "OL" in both polarities.
WARNING:
Never test diodes on a live circuit.
4.7. CONTINUITY
1. Set the rotary function switch to the
position.
2. Press the MODE button until the "
" symbol
appears on the LCD display.
3. Insert the black test lead into the COM input
jack and the red test lead into the
Ω
input jack.
4. Touch the test lead probes to the device or wire
under test.
5. A beeper will sound if the resistance is
approximately 50
Ω
or less and the resistance
value will be shown on the LCD display.
WARNING:
Never test continuity on a live circuit.
Summary of Contents for MT26
Page 1: ...INSTRUCTION MANUAL 600V AC DC BLUETOOTH MULTIMETER MT26...
Page 2: ...2...