4.10. BATTERY REPLACEMENT
1. Lift up the tilt stand.
2. Loosen the two Phillips screws on the battery/fuse cover.
3. Remove the battery/fuse cover.
4. Replace the batteries with three AAA batteries.
5. Observe proper polarity as shown inside battery compartment.
6. Install the battery cover and tighten the screws.
10
16
WARNING:
To avoid electric shock, remove the test leads from the
meter before removing the battery/fuse cover.
WARNING:
To avoid electric shock, do not operate meter until the
battery/fuse cover is securely fastened to the meter.
4.10. FUSE REPLACEMENT
1. Lift up the tilt stand.
2. Loosen the two Phillips screws on the battery/fuse cover.
3. Remove the battery/fuse cover.
4. Gently remove fuse and install new fuse into the holder.
5. Always use a UL recognized fuse of the proper size and value:
10A/600V (5 x 20mm) fast blow.
6. Install the batter cover and tighten the screws.
WARNING:
To avoid electric shock, remove the test leads from the
meter before removing the battery/fuse cover.
WARNING:
To avoid electric shock, do not operate meter until the
battery/fuse cover is securely fastened to the meter.
Summary of Contents for MT26
Page 1: ...INSTRUCTION MANUAL 600V AC DC BLUETOOTH MULTIMETER MT26...
Page 2: ...2...