Majestic • MER36MN, MER42MN Installation Manual • 2599-980 Rev. B • 5/23
72
3. If installing an optional rock/stone kit, refer to the in
-
structions in section 11.F.
4. Install glass assembly according to instructions in Sec
-
tion 11.H.
5. Install decorative barrier front according to instructions
included with front.
6. Reconnect electrical supply and turn on gas.
Note:
A tall, deep orange flame should be avoided; this
type of flame may cause increased soot residue. If this
type of flame is noticed, try adjusting the media directly
beneath the flame. If all flames appear to be tall and deep
orange in color, then open the primary air shutter.
NOTICE:
Flames should not appear orange or stretch to
the top of firebox. If flames are dark orange with dark,
smoky tips, provide more primary air to the burner by
opening the air shutter accordingly.
Risk Of Explosion.
• Place media according to instructions.
• Do NOT place media in a position that they
may fall into area in front of pilot.
WARNING
• Do NOT use any media other than the media supplied
with this appliance.
• Do NOT exceed one layer of media on base pan.
Fireplace will not function properly. Delayed ignition
could occur.
Risk Of Asphyxiation Or Fumes.
• Place media according to instructions.
WARNING
• Do NOT place media in area between glass and
firebox.
• Do NOT place media in a position that they may fall
into area between glass and firebox.
• Do NOT use any media other than the media
supplied with this appliance.
• Do NOT place media on base pan in excess of the
amount of media directed in Table 1.
Fireplace will not function properly.
Gas leak could occur.
An optional rock media kit is available for use with these
models. The rock jig, included in the manual bag assem
-
bly, must be used for proper placement of the optional
rock media. Table 2 shows the number of bags included
in the kit.
1. Bend tab on rock jig down as shown in Figure 11.5.
2. Place rock jig on glass media with lasered text “ROCK
JIG” facing up. Ensure that the rock jig sits flush
against the pilot bracket. See Figure 11.6.
Note:
Rock jig must be in place prior to installation of
stones.
2. Place rocks in a random manner around the rock jig as
shown in Figure 11.7.
3. Remove rock jig.
Consumer: Retain rock jig for future maintenance or
service needs.
Figure 11.6 Place Rock Jig
BEND TAB
Figure 11.5 Bend Tab on Rock Jig
Model
Kit Name
Kit Quantity
MER36MN
STONES-NATURAL
3
MER42MN
STONES-NATURAL
3
Table 2
PILOT BRACKET
PILOT BRACKET
F. Install Rock Jig for Optional Rock Media
(STONES-NATURAL)
