48
Majestic • MARQ42STIN Installation Manual • 2272-980 Rev. H • 4/21
LOG NUMBER 6 (SRV2272-706):
Place Log #6 on the groove on Log #2 and the far side of the grate. The end of the log
will sit on the grate base with the tip against the middle grate tine as shown in Figure 14. The log must NOT block or sit
directly over burner ports.
Figure 14. Log 6 from above.
Figure 15. Log 6 close-up of end.
LOG NUMBER 7 (SRV2272-707):
Note that Logs #7 and #8
are identical to each other. Place Log #7 on the close side of
the grate base and Log #4. Slide the end of the log into the
second grate tine from the right. Note that the “burnt” side
of the log will face in toward the burner.
Figure 16. Log #7 from rear.
Figure 17. Log #8 from front.
LOG NUMBER 8 (SRV2272-707):
Note that Logs #7 and
#8 are identical to each other. Place Log #8 on top of Log
#4, resting on the far left grate tine and the outside brick
panels as shown in Figure 17. The end of the log should
align with the mortar jointin the brick refractory. Pull Log #7
back slightly to secure Log #8 against the grate tine. The
“burnt” side of the log will face in toward the burner. Care
should be taken not to place the log where
I
t will restrict the
function of the accent lights.
LOG NUMBER 9 (SRV2272-708):
Note that Logs #9 and #10 are identical to each other. Place Log #9 on the groove on
Log #2 with the end resting against the side and bottom brick panels as shown in Figure 18.
Figure 18. Log 9 from rear.
22
66
11
66
77
44
77
88
44
99
22
