47
Majestic • MARQ42STIN Installation Manual • 2272-980 Rev. H • 4/21
LOG NUMBER 3 (SRV2272-703):
Place Log #3 as shown. The groove on the bottom of Log #3 should rest on the far right
grate tine as shown in Figure 9. Pull the log toward the front end of the unit until it contacts the far right grate tine. The log
must NOT block any burner ports. Note: Logs #2 & #3 look very similar. Compare the numbers molded into the bottom
of the logs against the list above.
Figure 8. Log #3 from front,
Figure 9. Log #3 close-up from front.
LOG NUMBER 4 (SRV2272-704):
Place Log #4 so that the groove on the bottom of the log rests on the grate bar as shown
in Figure 10. Twist the log until the notch on the side of the log contacts the second grate tine from the left as shown in Figure
11. The end of the log should rest on a ridge on the burner as shown in Figure 10. Note that there are burner ports close to
the log on both sides - the log must NOT block any burner ports.
Figure 10. Log #4 from front showing grate tine groove.
Figure 11. Log #4 close-up on the side showing groove against tine.
LOG NUMBER 5 (SRV2272-705):
Place Log #5 as shown. The groove on the underside of Log #5 shall rest on the far right
grate tine as shown in Figure 12. The other side of the log will sit in the groove on Log #1. See Figure 13. The log must NOT
block or sit directly over any burner ports.
Figure 12. Log #5 from above.
Figure 13. Log #5 from rear showing resting point on log and grate
tine.
33
33
44
44
11
55
55
11
