58
Majestic • DBDV36PLATIN, DBDV36PLATIL, DBDV42PLATIN, DBDV42PLATIL Installation Manual • 2454-980 Rev. F • 5/17
LOG E RESTS ON LOG D
5
. (LOG E):
Locate the pin for Log E in Figure 4. Place
Log E into the appliance with the burned out area facing
the front of the appliance. The right end of the log should
rest against the log pin, and the left end of the log should
rest on Log D. The back of Log E should contact the back
refractory. See Figure 9.
Figure 9. Log E Installed
E
Figure 10. Log F Installed
6
. (LOG F):
Place the narrow end of Log F into appliance
as shown in Figure 10. The narrow end of the log contacts
the back refractory and rests against the notch on Log D.
The front of Log F rests in the notch on Log A. Log F should
contact the left edge of the notch on Log A.
6
. (LOG G):
Place Log G into the appliance as shown
in Figure 11. The notch on the bottom of the log should
rest on the horizontal grate tine, approximately halfway
between the middle and right grate tines. The top of Log
G rests in the notch of Log A. It will be spaced almost
equally between Logs B and F.
6
. (LOG H):
Locate the pin for Log H in Figure 4. Place
Log H into Appliance as shown in Figure 12. The base of
the Log should rest against the log pin. The log will also
contact the right refractory. The top end of the log will rest
on Log A and be spaced about one inch from Log F. Figure
3 shows the completed log installation.
Figure 11. Log G Installed
Figure 12. Log H Installed
A
B
C
D
LOG E CONTACTS BACK
REFRACTORY AND LOG PIN
F
F
G
E
E
B
B
D
D
A
A
NARROW END OF LOG F RESTS AGAINST
NOTCH ON LOG D
LOG F RESTS AGAINST LEFT
SIDE OF NOTCH ON LOG A
LOG NOTCH ON HORIZONTAL GRATE TINE
ALMOST EQUAL SPACES
F
G
E
D
A
H
APPROX. 1 IN.
LOG H CONTACTS LOG PIN
& RIGHT REFRACTORY
LOG G IN NOTCH ON LOG A
Note:
See section 11.E of appliance installation manual
for details on placement of lava rock and embers.
