S3100 Install Manual (For S3100-9/18/26TC (TP)) V5.0
Installation Notice
z
Read through the installation instruction carefully before operating on
the system. Make sure the installation materials and tools are
prepared. And make sure the installation site is well prepared.
z
During the installation, users must use the brackets and screws
provided in the accessory kit. Users should use the proper tools to
perform the installation. Users should always wear antistatic uniform
and ESD wrist straps. Users should use standard cables and
connecters.
z
After the installation, users should clean the site. Before powering on
the switch, users should ensure th
e switch is well grounded. Users
should maintain the switch regularly to extend the lifespan of the
switch.
Security Warnings
z
When using SFP transceiver, do not stare directly at the fiber bore
when the switch is in operation. Otherwise the laser may hurt your
eyes.
z
Do not attempt to conduct the operations which can damage the
switch or which can cause physical injury.
z
Do not install, move or disclose the switch and its modules when the
switch is in operation.
z
Do not open the switch shell.
z
Do not drop metals into the switch. It can cause short-circuit.
z
Do not touch the power plug and power socket.
z
Do not place the tinder near the switch.
z
Do not configure the switch alone in a dangerous situation.
z
Use standard power sockets which have overload and leakage
protection.
z
Inspect and maintain the site and the switch regularly.
z
Have the emergence power switch on the site. In case of emergence,
switch off the power immediately.
Caution
Potential risk include: Electric leakage, Power supply arcing, Power line
breakage, Imperfect earth, Overload circuit and Electrical short circuit. If
electric shock, fire, electrical short circuit occurs, please cut off the
Maipu Confidential & Proprietary Information
Page
21
of
26
